Spiral Bevel Gear Testing Machine Y9520 manufacturer from China Hengyong International Group Limited Co.,Ltd

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: Y9520

Spiral Bevel Gear Tester Machine <

Spiral Bevel Gear Tester Machine

Quick Detail:

Y9520 Hand-operated Gear Tester is designed for testing the meshing and the tooth bearing of spiral bevel gears. The gear testing on this machine is done manually and simulates the real mounting conditions. Both the rotation of the pinion and the loading of the gear are done manually, too. Meshing of the gear pair is tested through modal meshing. The correct machine settings will be determined by means of measuring the position and the marking compound of the tooth bearing so as to keep the consistence of the production lot.

The followings are the technical specifications and effective configuration of Y9520:

Specifications:

Shaft angle	90 °
Hole of pinion spindle	Morse taper #4
Diameter of through hole of pinion	16 mm
Hole of gear spindle	Morse #4
Diameter of through hole of gear spindle	16 mm
Travel of pinion head	30-150mm
Travel of gear head	30-150mm
Maximum testing diameter	200mm

Machine Accuracy:

Radial runout of hole of pinion spindle Near spindle end(a)	0.004 mm
70 mm away from spindle end (b)	0.008 mm
Passive shaft hole circumference beating proximal end (a)	0.004 mm
At 70 mm from the spindle nose(b)	0.008 mm
Traveling tolerance of pinion spindle	0.008/80 mm
Traveling tolerance of gear spindle	0.008/80 mm
Tolerance of equal height of axes of pinion spindle and gear spindle	0.01 mm
Tolerance of shaft angle of axes of pinion spindle and gear spindle (checking with test bar)	0.01/120mm